Table of Contents
Prerequisites
Before jumping into the process, you need to make sure you have everything ready. If you miss any of these steps, the installation won’t work.
- Unlocked bootloader: Your phone’s bootloader needs to be unlocked for this to work. Most phones come with the bootloader locked to prevent changes, so this is a must.
- TWRP Image: Download the TWRP image file for your specific phone model from here.
- ADB & Fastboot Installed: Make sure you have the Minimal ADB and Fastboot tool installed on your computer.
- USB Debugging Enabled: This setting needs to be enabled on your phone.
- Backup your device: Although this process shouldn’t erase your data, it’s always a good idea to back up your important files.
Compatibility: These instructions should work for most Android phones running Android 7.0 or higher. If you have a Samsung device, this guide won’t work because it uses a different method (Odin).
Flash TWRP Using the TWRP App (No PC Required)
Looking for a way to install TWRP without needing a computer? This method lets you do everything right from your phone. Just make sure your device is rooted before starting.
Install the TWRP App
First, download and install the Official TWRP App from the Google Play Store here.
Open the app and accept the terms. This is the first step toward installing TWRP on your phone.
Run the App with Root Permissions
Next, select Run with root permissions when prompted. This is important because the app needs permission to change certain parts of your phone.
Select Your Device and Download the TWRP Image
Once you’ve allowed the app to run, tap TWRP Flash, and give it any permissions it asks for. Now, tap Select Device and look for your phone model in the list. If you see it, tap Download TWRP to grab the image file for your device.
Flash the TWRP Image
With the image file downloaded, go back to the app and tap Select a file to flash. Find the TWRP image you just downloaded, and select Flash to Recovery to install it.
Reboot to TWRP
After the installation, you’ll be asked if you want to reboot your phone. Select Reboot to Recovery—this will restart your phone and bring you directly into the TWRP menu.
Flash TWRP Using ADB & Fastboot (PC Required)
If you prefer using a computer or can’t use the TWRP app, the ADB and Fastboot method is a solid option. This method is reliable for most Android phones as long as your bootloader is unlocked.
Enable USB Debugging
Before getting started, you’ll need to enable USB Debugging. Go to Settings > About Phone, and tap Build Number seven times. After that, go back to Settings > Developer Options, and turn on USB Debugging.
Download TWRP Image for Your Device
Next, download the correct TWRP image file for your phone model. Rename the file to twrp.img to make it easier to work with later. Move this file to the folder where ADB is installed on your computer.
Boot into Fastboot Mode
Power off your phone, and boot into Fastboot Mode by holding the Power and Volume Down buttons at the same time. If this doesn’t work, try searching online for instructions specific to your device.
Connect to the PC and Verify the Connection
Plug your phone into the computer using a USB cable. Open a command prompt in the folder where you installed ADB (usually C:/Program Files (x86)/Minimal ADB and Fastboot). Hold Shift, right-click, and select Open Command Window Here.
Type the following command to make sure your device is recognized:
adb devices
If your device appears, you’re good to go. If not, you might need to check that your drivers are properly installed.
Flash the TWRP Image
Once the device is detected, type the command to reboot into Fastboot:
adb reboot bootloader
After your phone is in Fastboot mode, flash the recovery image with this command:
fastboot flash recovery twrp.img
Once it’s done, your phone will have TWRP installed.
Boot into TWRP Recovery
You can either reboot your phone with:
fastboot reboot
Or manually enter recovery mode by turning off the phone and holding the Power and Volume Down buttons again. Use the volume keys to navigate to Recovery Mode, and press Power to select it.
So, what’s next? Whether you’re thinking about installing a custom ROM or just want to make a full backup, TWRP gives you the tools to take control of your phone in ways the standard software simply doesn’t allow.