Table of Contents
Prerequisites
Here’s what you need before starting:
- Samsung USB Drivers
- ODIN Flash Tool
- TWRP Recovery
- Magisk ZIP (for systemless root)
- SuperSU ZIP (for system root)
A PC with a USB port, a microSD card for file storage, and a fully charged phone are also required to avoid interruptions.
Root Samsung Galaxy J2 Prime Using TWRP and Magisk
This method will give you root access without affecting your system files, making it easier to keep your phone up to date.
Boot into Download Mode
First, you need to boot your phone into Download Mode. This will allow you to flash files onto your phone using ODIN.
- Turn off your phone.
- Press and hold the Power, Volume Down, and Home buttons until the screen lights up.
- Press Volume Up to confirm entering Download Mode.
Flash TWRP Recovery Using ODIN
Next, we’ll install TWRP, a custom recovery tool, that will help us flash the necessary files.
- Open ODIN on your computer.
- Connect your phone to your computer with a USB cable.
- In ODIN, click on AP and select the TWRP file you downloaded.
- Uncheck “Auto Reboot” in the settings to prevent the phone from restarting automatically.
- Click Start and wait for the process to finish. You’ll see a “PASS!” message when it’s done.
Boot into TWRP Recovery
Now, let’s boot directly into TWRP recovery mode.
- Remove the battery, wait a few seconds, and put it back in.
- Press and hold the Power, Volume Up, and Home buttons to boot into TWRP Recovery.
Flash Magisk ZIP
Now that you’re in TWRP, you can install Magisk to root your device.
- In TWRP, select Install.
- Choose the Magisk ZIP file from your SD card.
- Swipe to confirm the installation.
- Once installed, wipe the Dalvik/Cache to ensure a smooth boot.
Reboot and Check for Root
After installing Magisk, reboot your phone.
- In TWRP, go to Reboot and choose System.
- After the reboot, open the Magisk app from your app drawer to confirm that your phone is now rooted.
Root Samsung Galaxy J2 Prime Using Odin and SuperSU
If you prefer using SuperSU, this method will guide you through rooting with a system-modifying approach.
Boot into Download Mode
To start, you’ll need to enter Download Mode again.
- Turn off your phone.
- Hold the Power, Volume Down, and Home buttons until the screen turns on.
- Press Volume Up to enter Download Mode.
Flash Custom Recovery Using ODIN
Next, let’s flash the custom recovery using ODIN.
- Open ODIN on your computer.
- Connect your phone via USB.
- In ODIN, click on AP and choose the custom recovery file.
- Uncheck Auto Reboot.
- Click Start and wait for the process to complete.
Boot into Recovery Mode
Now, boot into recovery mode so we can install SuperSU.
- Remove the battery, wait a few seconds, and insert it back in.
- Press the Power, Volume Up, and Home buttons to enter recovery mode.
Flash SuperSU ZIP
Once in recovery mode, follow these steps to root your device with SuperSU.
- In recovery, select Install.
- Choose the SuperSU ZIP file from your SD card.
- Swipe to confirm installation.
- Wipe the Dalvik/Cache to avoid any issues during reboot.
Reboot and Check Root
After flashing SuperSU, reboot your phone.
- In the recovery menu, select Reboot and choose System.
- Once rebooted, open the SuperSU app to confirm that root access has been successfully gained.
And there you have it! Now that your Samsung Galaxy J2 Prime is rooted, you’re ready to take full control of your device. Whether you want to remove unwanted apps or try out some advanced settings, you’re now in control!